The temperature on the front panel will be set on 80 degrees on your arrival. Set this to your desired temperature.
Undo all four corners of the cover, and fold the front half over the back. Then just lift the folded cover and it will hang on the back of the spa on the black metal bar. You don't have to take the cover off, just fold it back.
If you don't undo the back straps, you'll either tear them off the cover or tear the brackets out of the spa.
You'll need to open the umbrella over the spa to open the cover. If you don't want the umbrella, undo the knob near the bottom of the umbrella and swing it out of the way.
You can either use the control panel on the front of the spa or the one in the back right corner to turn on the circulation pumps. There are two pumps; pump #1 has one position and pump #2 has two positions.
The lighting is controlled from either control pad. The secret to adjusting the lighting is to get to the red light. From there, you can dim the light, or get the lights to alternate colors. You just have to play with it.
There are test strips and chemicals next to the spa. Go easy on the chlorine unless the water is cloudy.
When you leave, please reset the temperature to 80 degrees and make sure the spa light is off.
No comments:
Post a Comment